Welcome to our websites!

Water Spray Type Canned Food Sterilization Retort

Short Description:

Water Spray Retort/Autoclave is that water sprays on the surface of product package to transfer the heat, this kind of retort is suitable for tinplate cans, glass bottles, glass jars, plastic bottles, pouched food, etc.


Product Detail

Product Tags

Water Spray Retort/Autoclave is that water sprays on the surface of product package to transfer the heat, this kind of retort is suitable for tinplate cans, glass bottles, glass jars, plastic bottles, pouched food, etc.

1

Features Of Retort

1. Our retort is safe:

Our retort door is interlock to guarantee the door’s sealing.

All retort body is detected in our detecting room to check if the welding is good。

Equipped with safety valve, when retort has problems, can manual opening the safety valve to relief pressure.

2. Our electric parts are Siemens and Schneider to guarantee our machine’s stable running.

3. Equipped with plate heat exchanger, process water does not contact with cooling water and steam in the whole process to avoid the secondary pollution of the food

4. Used a low amount of process water, save steam and water。

Equipment characteristics

1. By heat exchanger for cooling, process water does not contact with cooling water in the whole process to avoid the secondary pollution of the food. And dispense with water treatment chemicals. Thereby reach effect of high temperature sterilization in short time.

2. A small amount of process water can rapidly cycle to warm fast to the setting sterilization temperature.

3. Perfect pressure control ensures the entire production process, overpressure is applied to adapt to changes in the internal pressure of the product packaging, so that the degree of deformation of the product packaging to a minimum. It is particularly suitable for gas packaging and glass bottles.

4. Advanced and stable SIEMENS control system ensures that customers can timely find the supply chain in the world to reduce downtime.

5.Stainless steel surface of retort body is frosted to improve the surface hardness and corrosion resistance, especially the resistance to corrosion of chlorine added in cooling water.

6. Fast heating A small amount of circulating water enters the pot, and an imported high-efficiency heat exchanger is used. The packaging can quickly rise from 20 degrees to 121 degrees within 10-15 minutes.

7. The temperature in the tank is stable and the heat distribution is uniform. COSCO's hot water spray system is equipped with a series of nozzles on the four corners of each tray in the processing tank to make the atomized hot water fully contact the product, thereby ensuring that the equipment inside the equipment The temperature of the points is the same.

8. Save energy The steam condensate recovery system can directly recover the condensate produced by the heat exchanger during the heating process and use it as circulating water for sterilization, thereby reducing energy consumption.

9. Indirect heating and cooling to prevent secondary pollution The circulating water is indirectly heated or cooled by the plate heat exchanger. The circulating water in the pot is always in a sterile state during heating or cooling. After the sterilization is completed, the water droplets on the inner surface of the pot and the surface of the packaging bag will not be left after being dried. The white scale is small, the whole packaging bag is transparent and clean, preventing secondary pollution.

Our Model:

Model 1200*3600 1500*5250
Volume 4.5m3 10m3
Steel thickness 5mm 8mm
Design temperature 145℃ 145℃
Design Pressure 0.44Mpa 0.44Mpa
Test Pressure 0.35Mpa 0.35Mpa
Material SUS304 SUS304

Our Retort/Autoclave can be designed according to customer's requirement

Shipment

Use

Factory

Our company started manufacturing retort/autoclave in 2004, we have over 10 years of experience in this area. So, you can trust our quality and our team.

3
4

Our customer case


  • Previous:
  • Next:

  • Write your message here and send it to us